Aleppo, all the eternal evacuation of the production of Aleppo, height 14 to 52 cm with the best quality

Aleppo, the entire evacuation of Yavidan

🔴 Aleppo, full emptying of Javidan 🔴 Production of Aleppo with a volume of 4 to 30 liters..

Export your products to the whole world with the productions of Javidan Collection..

Printing with the best quality and the best composition..

Printing on metal can be done up to six colors..

Halab inside the lacquer for water-based products can also be produced..

Monochrome can be produced with anti-scratch varnish..

🔴 Aleppo production, full discharge for solvent, water base, paint, resin, epoxy, bitumen and all petrochemical materials

The Javidan collection is at your service by providing the best advice in preparing Aleppo, cans and gallons in a simple and printed way.

Optimum use of tinplate sheets in the production of washers and similar parts

🏭 Introduction

---

⚙️ The advantages of using thin plate bypass in the production of washers

Using scraps of tinned sheets instead of buying new sheets reduces the cost of production significantly.

Due to its thinness and flexibility, thin plate is very suitable for producing metal washers with precise molds.

The tin layer on the sheet makes the manufactured gasket resistant to moisture and chemicals.

Internal recycling of sheets reduces waste and aligns with environmental standards.

---

🔍 Technical and managerial challenges

Scraps are usually in irregular pieces and need to be sorted and recut.

Some scraps may have scratches, stains or discoloration that are not acceptable for final products.

To use small or irregular parts, adjustable or multipurpose molds are required.

Collecting, separating and storing waste requires a precise and regular storage system.

---

🧠 practical solutions for optimal exploitation

By setting up a dedicated cutting and punching line for waste, they can be turned into usable parts.

It is possible to produce miniature washers, decorative metal parts, or light industrial parts by using scrapers.

Receiving thin plate waste from neighboring industries can be a stable and inexpensive source of material supply.

Intelligent layout algorithms can provide the best cutting patterns to further reduce waste.

Introducing products as "green" or "environmentally friendly" can create added business value.

---

📦 practical examples

- Production of metal washers for automotive industries, household appliances or construction facilities.

- Making decorative metal parts for special packaging or industrial advertising.

- Production of connecting or holding parts in light industrial equipment.

---

🌍 conclusion

Using tinplate sheets in the production of washers and similar parts is not only an economic solution to reduce costs, but also an effective step towards environmental sustainability and industrial innovation. With careful planning, intelligent design and cooperation between production units, these seemingly worthless resources can be turned into profitable assets.

Iran has a significant position in the metal can manufacturing industry in the region and is moving towards global competition. Although it is still far from giants such as Germany, Japan or America on a global scale, with the growth of technology and increase in production capacity, Iran has been able to gain an important share in the domestic market and regional exports.

1. 🟢 Quartz cans or simple one-kilo cans with normal lids or with collager (intestine) lids in diameters of 105, 108, and 110 mm with a height of 10.5 to 17 cm for various uses such as paints, resins, solvents, and chemicals, with appropriate and standard sheet thickness, with printing.

1. 🟠 Javidan canning is also a manufacturer of 4 kilo, 5 kilo and 6 kilo gallons with a diameter of 160, 165 and 180 cm and a height of 17.5 to 24 cm with a suitable sheet thickness in the form of a simple or double ring, according to the customer's request and sometimes for halal or hardener materials with a collier or a tube lid with printing.

1. 🟠 Javidan canning also produces round hardware cans, including cans with a diameter of 99 and 83 mm and can be produced with a desired height, along with a screw lid or a push lid, which are usually considered to be 32, 42, and 57 sizes.

1. ⚫ Immortal Canning, a producer of full-empty cans, includes the body of the door, plastic tape, metal belt and plastic seal in sizes 5 to 30 liters from a height of 15 to 50 cm, with a full guarantee of sealing the body, floor and air sealing of the door with first-class sheet, tin plated tin plate, can be produced with standard sheet thickness, the thickness of the sheet varies according to the liter of full-empty Aleppo, and mainly 0.30 mm sheet thickness is used for 20 liters of Aleppo.

1. 🟡 Javidan cans with printing services of 4 colors or more and even monochrome or so-called, tone plate, along with colorless anti-scratch varnish on the can or Aleppo. Javidan cans is mainly a manufacturer of quarter cans, half-gallon round cans and full-empty cans, square cans, square cans, book cans and fancy cans.

1. 🟣 Javidan canning is ready to provide production and printing services of all kinds of cans and cans with white, golden and colorless varnishes for water-based or highly corrosive materials. It should be noted that all materials that contain water or water-based compounds must be protected by a layer of special varnish inside the can or can and the welding area of ​​the can that does not have varnish must be covered with varnish manually and with a pen.

1. 🟢 All dear customers, if they have a specific product request, they can announce the product type, size, height and diameter so that the desired mold can be prepared and the order placed in the production line.

Canning, the role of Javidan Canning in the production of hull paint cans, in recent years, Javidan canning industry has found a special place in the ship painting market by focusing on the packaging of industrial paints for large structures. The tanks designed by Javidan canning with features such as resistance to corrosion, air pressure, sea humidity and safe transfer of chemicals have been highly regarded. In the process of producing metal tanks, Javidan canning uses materials such as galvanized steel with special anti-rust coatings so that the colors used in painting the ship are properly preserved. One of the honors of Yavidan Canning is to produce cans with resistant seams and secure lids to prevent paint leakage during sea transportation. Paints used for ship hulls usually contain chemical compounds that are resistant to salt, UV and waves. Therefore, their packaging should be in cans designed and produced by Javidan canning specialists to maintain their effectiveness during use. The research and development unit at Javidan Canning Company, in collaboration with industrial paint laboratories, designs the internal structure of the cans in such a way that the paint can be stored for a long time without changing its properties. The quality of making the bottles in Javidan canning guarantees that the color remains stable until the moment of consumption. When exporting paint to different ports, transport companies use the products of Javidan canning because the bottles of this brand are able to withstand the pressure caused by changes in temperature and humidity. This trust comes from years of experience and innovation in Javidan canning. Graphic design and printing on the cans are also done by Javidan canning design team. The use of wear-resistant colors and identification patterns makes the contents of each can clearly visible and the error of use is minimized. Another feature of the cans used in ship painting is the multi-layer structure of their body, which is implemented by the latest technologies of immortal can making. This structure increases the mechanical and chemical resistance of the cans against marine conditions. Also, the packaging units in Javid canning complex provide reliable products by using advanced quality control systems. For this reason, many shipbuilding companies use only the paints produced by Javidan Canning to paint the hulls of their ships. Due to the high volume of the market, Javidan Canning has optimized its production lines in such a way that it can respond to large orders in a short time. This has increased customer satisfaction and expanded the international market of Immortal canning. Finally, sustainable development and attention to the environment in the production process are also considered priorities of Immortal canning. The use of recyclable materials and reduction of energy consumption is an approach that has been followed seriously by Imavidan canning in recent years.